ANTIVIBRATION ACR-MINI "ACRTOOLS"

• MACHINERY ANTIVIBRATION SUPPORT
• SUSPENSION OF MACHINERY (Air Conditioning Units, Ventilators e.t.c.)
• SUSPENSIONS OF SOUND INSULATION
• CEILINGS MADE OF GYPSUM BOARD

The ACR-mini, can be fixed with an anchor on the floor, be suspended on the ceiling through anchors and also be placed on a metal base with a passing through screw of Μ8 mm.

Due to its pioneer design, the ACR-mini gives big deflection when loaded. As it’s known - LARGER DEFLECTION MEANS BETTER ANTIVIBRATION RESULTS.

The anchor rod of the suspension must be perpendicular.

The passing through screw eliminates the possibility of falling of the machinery in case of destruction of the elastic part.

The weight of the machinery must be applied on the top surface of ACR-mini.

ATTENTION: Do not screw the holding screw tight .
The screw and the nut must not compress any elastic part.
It is important not to forget to put the ACR-mini’s neck through the hole and to place it on the ELASTIC WASHER and on the metal base.