Square shaded-pole motors 25W/ EBM TRANS 220V(MOTER)

Square shaded-pole motors

Standard design

• Foot  mounting: Track dimension 26 mm (height 51 mm) 
• Type of protection: IP 42
• Electrical connection: Jacketed cable 3x 0.5 mm with brass lead tips
• Product conforming to standard: CE
• Approvals: VDE

Valid for all designs

Material : housing made of die-cast aluminioum

                 Stator pack : coated in blank

Direction air flow : “V” or  “A” (depending) on axial impeller used)

Direction of rotation: Counter –clockwise, seen on shaft end

Insulation class: “B”

Mounting position: Any preferably horizontal

Condensate discharges: None

Mode of  operation :Continuous operation (S1)

Bearing: Self-adjusting calotte sleeve bearing (mean service life of 30.000 hours in horizontal Installation position)

Motor protection: Impedance protection (combination A-C) or thermal overload protector internally switched (combination D-H)

Protection class: I

Mounting: Guard grille and wall ring are mounted on to protruding

thread ends of the A side. The Q- motor can also be screwed on via mounted flanges (integrated in the bearing shields)

Axial impeller mounting : Mounted to the motor shaft using plastic adapter with pulling peg and an M4 screw(combination A-D) or M5 (combination E-H) screw.

Power specifications : At 60 hz. the blande angle of the axial impellers must be reduced by 6 each